Your SmartPour 1.1S

Your SmartPour 1.1S

Need help setting up and using your SmartPour 1.1S?

Watch this 90-second video.

SmartPour Tips

  • Make sure that the vacuum adaptor found at one end of the Hard Inlet Tube goes into the spirit when assembling your SmartPour 1.1S. Do not insert this end into your SmartPour or it will prevent pouring!

  • When assembling your SmartPour 1.1S, make sure the Hard Inlet Tube is slightly bent so the intake end sits in the corner of the glass vessel of the ecoTOTE.

  • Make sure your SmartPour 1.1S is charged before use. Charge your SmartPour with the USB-C cable provided when needed.

  • Need to set the volume buttons on your SmartPour 1.1S Plus model? Full instructions for setting each volume button can be found here or on the Quick Start Card in the SmartPour box. *applies to Plus models only*

  • Clean your SmartPour before using it the first time and when switching between spirits. Full instructions for cleaning your SmartPour 1.1S can be found here.

  • Prime your SmartPour 1.1S each time you fit it onto an ecoTOTE. Place an empty vessel under the steel dispense nozzle and double tap the 50ml volume button (or closest alternative) on the keypad. Discard any dispensed spirit.

  • As you remove your SmartPour 1.1S from the ecoTOTE, double tap any volume button to drain any remaining spirit.

Need more help?

The SmartPour 1.1S Operating Manual can be found here.

SmartPour troubleshooting tips can be found here.

Need help setting up and using your SmartPour 1.1S? Watch this 90-second video.

SmartPour Tips

  • Make sure that the vacuum adaptor found at one end of the Hard Inlet Tube goes into the spirit when assembling your SmartPour 1.1S. Do not insert this end into your SmartPour or it will prevent pouring!
  • When assembling your SmartPour 1.1S, make sure the Hard Inlet Tube is slightly bent so the intake end sits in the corner of the glass vessel of the ecoTOTE.
  • Make sure your SmartPour 1.1S is charged before use. Charge your SmartPour with the USB-C cable provided when needed.
  • Need to set the volume buttons on your SmartPour 1.1S Plus model? Full instructions for setting each volume button can be found here or on the Quick Start Card in the SmartPour box. *applies to Plus models only*
  • Clean your SmartPour before using it the first time and when switching between spirits. Full instructions for cleaning your SmartPour 1.1S can be found here.
  • Prime your SmartPour 1.1S each time you fit it onto an ecoTOTE. Place an empty vessel under the steel dispense nozzle and double tap the 50ml volume button (or closest alternative) on the keypad. Discard any dispensed spirit.
  • As you remove your SmartPour 1.1S from the ecoTOTE, double tap any volume button to drain any remaining spirit.

Need more help?

The SmartPour 1.1S Operating Manual can be found here.

SmartPour troubleshooting tips can be found here.